|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MINIATURE RELAY 2 POLES--1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES s FEATURES q q q TF OR DE FB NE R1 SI BE 2 S GN W DI ER SC IE ON S TIN TO IE D q q q Super miniature size: 0.2 inch x 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom relay. Slim type for high density mounting Conforms to Bellcore TR-NWT-001089 and FCC Part 68 requirements UL recognized and CSA certified Low power consumption Conforms to IEC 950 (W type only) - 2.5 mm clearance and creepage between coil and contacts -5000 V surge strength between coil and contacts (2x10s surge wave) -2000 Vrms dielectric strength between coil and contacts -UL 1950 and IEC950 (approval in process) NO 12 (d) -P (e) s ORDERING INFORMATION FBR12 N (a) (b) D (c) [Example] (a) (b) (c) -** (-CSA) (f ) (g) Series Name FBR12 : FBR12 Series N W H Enclosure & Coil Power : Standard (plastic sealed type) : High dielectric strength type (plastic sealed type) : High sensitivity type Refer to the COIL DATA CHART Coil Type D : DC coil (d) (e) (f) Nominal Voltage Contact Material Nil -P : Gold-overlay silver-nickel : Gold-overlay silver-palladium Custom Designation CSA Standard To be assigned custom specification (g) -CSA -CSA : UL114 + CSA recognized : UL1950 + CSA (under application) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR12ND05 Stamp: 12ND05 s SAFETY STANDARD AND FILE NUMBERS UL508, 1950, 114 (File No. E63615) C22.2 No. 0, No. 14 (File No. LR40304 or LR64026) Nominal coil voltage 3 to 24 VDC 0.5 A 125 VDC resistive 2 A 30 VDC resistive 0.3 A 110 VAC resistive Contact rating 1 FBR12 SERIES s SPECIFICATIONS Item Standard (Gold-overlay silver-nickel) Standard Contact Arrangement Material Style Resistance (initial) Rating (resistive) 2 form C (DPDT) Gold-overlay silver-nickel Gold-overlay silver-palladium High dielectric strength type -P type (Gold-overlay silver-palladium) Standard High dielectric strength type TF OR DE FB NE R1 SI BE 2 S GN W DI ER SC IE ON S TIN TO IE D Maximum Carrying Current Maximum Switching Power Max. Switching Voltage*1 2 A (at 20C) 62.5 VA or 60 W 250 VAC or 220 VDC 2A Maximum Switching Current Minimum Switching Load*2 Capacitance (at 10 kHz) 10 A 10 VDC (reference) Approximately 1.0 pF (between open contacts, adjacent contacts ) Approximately1.0 pF (between coil and contacts) Approximately 0.14 to 0.2 W Approximately 0.23 to 0.25 W Approximately 0.14 to 0.2 W Coil Nominal power (at 20C) Operate power (at 20C) Approximately 0.08 to 0.112 W Approximately 0.13 to 0.14 W Approximately 0.08 to 0.112 W Thermal Resistance at Continuous Thermal Load Operating Temperature Operating Humidity Approximately 115C/W -40C to +85C (no frost) (refer to the CHARACTERISTIC DATA) 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 4 msec. Release (at nominal voltage) Max. Switching Frequency Resistance (initial) Maximum 4 msec. Mechanical 3 Hz or electrical 0.5 Hz (at contact rating) Insulation Dielectric between open contacts Strength adjacent contacts between coil and contacts between open contacts, adjacent contacts Minimum 1000 M (at 500 VDC) 1,500 1,000 VAC 750 1 minimum 1,500 VAC 1 min. 1,500 V 10 x 700 s 2,500 V 2 x 10 s 10 NO Bifurcated Maximum 100 m (at 0.1 A 6 VDC) 0.5 A 125 VAC or 1 A 30 VDC Approximately 0.23 to 0.25 W Approximately 0.13 to 0.14 W Surge Strength 2,000 VAC 1 min. 2,500 1,250 700 1,500 VAC 1 min. 2,000 VAC 1 min. 2 10 between coil and contacts 5,000 V 2 x 10 s 2,500 V 2 x 10 s 5,000 V 2 x 10 s Life Mechanical Electrical (at contact rating) DC AC 1 x 108 operations minimum 2 x 105 operations minimum 1 x 105 operations minimum 5 x 105 operations minimum 200 x 103 operations minimum Other Vibration Resistance Shock Resistance Weight Misoperation Endurance Misoperation Endurance 10 to 55 Hz (double amplitude of 3.3 mm) 10 to 55 Hz (double amplitude of 5.0 mm) 500 m/s2 (111 ms) 1,000 m/s2 ( 6 1 ms) Approx. 1.5 g Approx. 1.9 g Approx. 1.5 g Approx. 1.9 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR12 SERIES s SPECIFICATIONS Item High Sensitive Type Standard (Gold-overlay silver-nickel) Contact Arrangement Material Style Resistance (initial) Rating (resistive) 2 form C (DPDT) -P type (Gold-overlay silver-palladium) TF OR DE FB NE R1 SI BE 2 S GN W DI ER SC IE ON S TIN TO IE D 0.3 A 125 VAC or 1 A 30 VDC Maximum Carrying Current Maximum Switching Power Max. Switching Voltage*1 2 A (at 20C) 62.5 VA or 30 W 250 VAC or 220 VDC 2A Maximum Switching Current Minimum Switching Load*2 Capacitance (at 10 kHz) 10m VDC - 10 A Approximately 1.0 pF (between open contacts, adjacent contacts ) Approximately1.0 pF (between coil and contacts) Approximately 50mW Coil Nominal power (at 20C) Operate power (at 20C) Operating Temperature Operating Humidity Approximately 40m W -40C to +70C (no frost) (refer to the CHARACTERISTIC DATA) 45 to 85%RH Time Value Operate (at nominal voltage) Maximum 5 msec. Release (at nominal voltage) Resistance (initial) Maximum 5 msec. Insulation Minimum 1000 M (at 500 VDC) Dielectric between open contacts Strength adjacent contacts between coil and contacts between open contacts, adjacent contacts 750 VAC 1 minute 1,500 VAC 1 minutes 1,500 V 10 x 700 s 2,500 V 2 x 10 s Surge Strength between coil and contacts Life Mechanical 1 x 108 operations minimum Electrical (at contact rating) DC 2 x 105 operations minimum 5 x 105 operations minimum AC 1 x 105 operations minimum Other Vibration Resistance Shock Resistance Weight Misoperation Endurance Misoperation Endurance 10 to 55 Hz (double amplitude of 3.3 mm) 10 to 55 Hz (double amplitude of 5.0 mm) 500 m/s2 (111 ms) 1,000 m/s2 ( 6 1 ms) Approx. 1.9 g NO Gold-overlay silver-nickel Bifurcated Gold-overlay silver-palladium Maximum 100 m (at 0.1 A 6 VDC) 200 x 103 operations minimum *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 3 FBR12 SERIES s COIL DATA CHART 1.STANDARD MODEL Standard FBR12ND03 FBR12ND04 FBR12ND05 FBR12ND06 FBR12ND09 FBR12ND12 FBR12ND24 -P type FBR12ND03-P FBR12ND04-P FBR12ND05-P FBR12ND06-P FBR12ND09-P FBR12ND12-P FBR12ND24-P Nominal voltage 3 VDC 4.5 VDC Nominal Coil current resistance (at nominal (10%) voltage) approx. 64.3 145 178 257 579 46 mA 31 mA 28 mA 75% max. 10% min. Approx. 0.14 W of nominal of nominal (at nominal voltage voltage voltage) Approx. 0.08 W Max. Approx. 20 deg Max. (at nominal voltage) Must operate1 voltage* Must operate1 voltage* Nominal power Operate power Coil temperature rise *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20C. 2.HIGH DIELECTRIC STRENGTH MODEL *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20C. 3. HIGH SENSITIVITY TYPE MODEL TF OR DE FB NE R1 SI BE 2 S GN W DI ER SC IE ON S TIN TO IE D 5 VDC 6 VDC 9 VDC 23 mA 15 mA 11 mA 12 VDC 24 VDC 1,028 2,880 8 mA 0.2 W 0.112 W Nominal voltage Standard -P type Nominal Coil current resistance (at nominal voltage) (10%) approx. 39 77 mA 51 mA 46 mA 88 Must operate1 voltage* Must release 1 voltage* Nominal power Operate power FBR12WD03 FBR12WD04 FBR12WD05 FBR12WD06 FBR12WD09 FBR12WD12 FBR12WD24 FBR12WD03-P 3 VDC FBR12WD04-P 4.5 VDC FBR12WD05-P FBR12WD06-P FBR12WD09-P FBR12WD12-P FBR12WD24-P 5 VDC 6 VDC 9 VDC 108 156 352 38 mA 25 mA 19 mA 10 mA 75% max. 10% min. Approx. 0.23 W of nominal of nominal (at nominal voltage voltage voltage) Approx. 0.13 W Max. 12 VDC 24 VDC 626 2,304 0.25 W 0.14 W Nominal voltage 3 VDC 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC Coil resistance (10%) 180 405 500 720 1,620 2,880 80% max. 10% min. Approx. 0.05 W of nominal of nominal (at nominal voltage voltage voltage) Approx. 0.04 W Max. Must operate1 voltage* Must release1 voltage* Nominal power Operate power Standard -P type FBR12HD03 FBR12HD04 FBR12HD05 FBR12HD06 FBR12HD09 FBR12HD12 FBR12HD03-P FBR12HD04-P FBR12HD05-P FBR12HD06-P FBR12HD09-P FBR12HD12-P NO 30 deg Coil temperature rise Approx. 30 deg (at nominal voltage) 33 deg Coil temperature rise Approx. 4 deg (at nominal voltage) *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20C. 4 FBR12 SERIES s CHARACTERISTIC DATA Range of operation temperature and voltage Nominal voltage multiplying factor (%) 160 150 140 130 120 110 100 90 80 70 ge volta Maximum switching capacity (x104) Life curve 500 2.0 Service life (operations) Contact load current (A) (DATA) assumes that the maximum allowable temperature of E type insulation coil is 115C AC resistive load ( AC contact rating) DC resistive load ( DC contact rating) Operating voltage range TF OR DE FB NE R1 SI BE 2 S GN W DI ER SC IE ON S TIN TO IE D 0.2 um xim Ma e ltag l vo coi ble wa allo 100 50 30 V DC resistive load (-P)TYPE Mus t ope rate NO 0.5 0.3 0.1 10 1.0 10 5 125 V AC resistive load (-P)TYPE 1 -10 0 10 20 30 40 50 60 70 80 20 30 50 125 200 0.5 1.0 1.5 2.0 Operating temperature (C) Contact load voltage (V) Contact load current (A) s REFERENCE DATA 60 Distribution of operate and release voltage Operate Release Distribution of operate and release time Operate Release Distribution of contact resistance 100 80 50 80 60 Distribution (%) Distribution (%) 40 60 30 Distribution (%) 40 40 20 20 20 10 0 0 0 0 10 20 30 40 50 60 70 80 0 1 2 3 4 5 6 7 8 0 10 20 30 40 50 60 70 80 Rated coil voltage multiplying factor (%) Time (ms) Contact resistance (m) s DIMENSIONS qDimensions 14.6+0.4 qSchematics (BOTTOM VIEW) 1 345 qPC board mounting hole layout (BOTTOM VIEW) 5.08 7.2+0.3 9.7+0.3 12 10 9 8 (0.95) 0.50 0.25 5.08 3.2 (1.06) 5.08 VSHOW ONE OUT OF THBSB 3 DIMENSIONS (See NA) 2.54 2.54 8- o1 .00 qTube carrier 10.6 Max. 5002 15.6 Max. Unit: mm 30 pcs/Tube 5 FBR12 SERIES Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info.marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com Fujitsu Components International Headquarter Offices TF OR DE FB NE R1 SI BE 2 S GN W DI ER SC IE ON S TIN TO IE D (c) 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 07/26/2004. NO 6 |
Price & Availability of FBR12 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |